Medium Size Seahorse resin wall art.

Unique ref no. 0401

Size - Length - 12 inch (30cm)
(Size is approximate)

Colours - Black, Red, Orange, White, and Gold

Unique and individual piece of wall art. Made from resin and MDF base.

Each Seahorse is made individually, first the base is cut out from 12mm MDF in my workshop using a router, this gives a stable base for the resin. After the MDF has had a coat of black water based primer the resin is prepared with different pigments and is poured onto the MDF. Next with either a straw and my lungs or a hair dryer the resin is "pushed" around until it has completely covered the MDF base. Sometimes I use other tools, such as "cocktail sticks" to add lines within the resin for extra detailing.

The resin has only a 30 minute working time before it starts to set, so whatever patterns are made at this point are set.

The resin has to "cure" for approx 5-7 days, after which the back is sanded to remove any drips from the cured resin, and my brand is applied. The Seahorse is now finished and ready for hanging.

As this wall art contains MDF and the back is not sealed, this is for interior use only and should NOT be used outside as water ingress will damage the art. Water damage is not covered for return.

A hanger is attached to the back of the seahorse for hanging, if however placing of a screw or nail for the hanger is not possible remove the hanger and use double sided sticky pads which are provided.

Read more